Camera scheme
A combo box at the top picks which of the three navigation presets the viewport uses; a paragraph underneath always shows that preset's own gesture list verbatim.
- Mesh Morpher (default) - "Alt+LMB orbit, Alt+RMB zoom, MMB or LMB+RMB pan, wheel zoom. Hold RMB to look around and fly with WASDQE; a plain LMB drag walks the camera."
- Maya - "Alt+LMB tumble, Alt+MMB pan, Alt+RMB zoom, wheel zoom. Plain LMB is left to the active tool. Hold RMB to look around and fly with WASDQE."
- Blender - "MMB orbit, Shift+MMB pan, Ctrl+MMB zoom, wheel zoom. LMB (including Alt+LMB) always goes to the active tool. Hold RMB to look around and fly with WASDQE."
See Navigating for what these gestures actually do in the viewport.
Rebinding
Every command below is one row: its display name, a button that captures your next key press as its new chord, and a Reset button that is disabled once the command is already at its shipped default.
Rebinding onto a chord that is already in use somewhere else pops this prompt instead of overwriting silently:
"{0}" is already assigned to "{1}".
Reassign it to "{2}"? The existing binding will be cleared.
{0} is the chord you just pressed, {1} is the command that currently owns it, and {2} is the command you were trying to rebind. Confirming clears the old assignment so the chord only ever fires one command at a time.
A Reset All to Defaults button at the bottom of the page puts every shortcut back to its shipped default in one click.
Default bindings by category
General
| Command | Default chord | Notes |
|---|---|---|
| Undo | Ctrl+Z | |
| Redo | Ctrl+Y | |
| Open Content Browser (editor) | Ctrl+Space | Editor host only - the standalone Studio app ignores it. |
Graph Editor
| Command | Default chord |
|---|---|
| Select All | Ctrl+A |
| Copy | Ctrl+C |
| Cut | Ctrl+X |
| Paste | Ctrl+V |
| Duplicate | Ctrl+D |
| Frame Graph | F |
| Find Node | Ctrl+F |
| Delete Selected | Delete |
| Create Comment | C |
Viewport
| Command | Default chord | Notes |
|---|---|---|
| Frame Selection | F | See Focus (F) for exactly what it frames. |
Sculpt Brush
| Command | Default chord | Notes |
|---|---|---|
| Radial Brush Menu (hold) | Space | Opens the radial brush picker while held. |
| Adjust Brush Size (hold) | B | Drives the cursor-anchored size readout while held. |
| Adjust Brush Falloff (hold) | N | Drives the cursor-anchored falloff readout while held. |
| Adjust Brush Strength (hold) | T | Drives the cursor-anchored strength readout while held. |
| Decrease Brush Size | [ | |
| Increase Brush Size | ] | |
| Decrease Brush Strength | Shift+[ | |
| Increase Brush Strength | Shift+] | |
| Brush Slot 1 - 9 | 1 - 9 | Fires whichever brush is assigned to that slot in the Brush Palette below. |
| Brush Slot 10 | 0 | |
| Toggle Symmetry | X | |
| Cycle Symmetry Axis | Shift+X | |
| Toggle Mask-Paint Mode | M | |
| Invert Mask | Ctrl+I | |
| Clear Mask | Alt+M | |
| Toggle Lazy Mouse | L | |
| Mask: Marquee Mode | Shift+M | |
| Mask: Blur | Ctrl+B | |
| Mask: Sharpen | Ctrl+Shift+B | |
| Mask: Grow | Ctrl+G | |
| Mask: Shrink | Ctrl+Shift+G | |
| Mask: Cavity | Ctrl+K |
Viewport View Mode
| Command | Default chord |
|---|---|
| Cycle View Mode (Lit / Unlit / Wireframe) | unbound |
| View Mode: Lit | unbound |
| View Mode: Unlit | unbound |
| View Mode: Wireframe | unbound |
All four are unbound out of the box - assign a chord here if you want a key for them. See View Modes for the full mode list.
Viewport Camera
| Command | Default chord | Notes |
|---|---|---|
| Camera: Perspective | Numpad 0 | |
| Camera: Front | Numpad 1 | |
| Camera: Back | Numpad 2 | |
| Camera: Left | Numpad 3 | |
| Camera: Right | Numpad 4 | |
| Camera: Top | Numpad 5 | |
| Camera: Bottom | Numpad 6 | |
| Camera FOV + | unbound | Steps Field of View by 5 degrees, clamped 1 - 170. |
| Camera FOV - | unbound | Same step, the other direction. |
| Camera Speed + | unbound | Multiplies Camera Speed by 1.25, clamped 1 - 100000. |
| Camera Speed - | unbound | Divides Camera Speed by 1.25, same clamp. |
Landmarks
| Command | Default chord |
|---|---|
| Toggle Spline Mode | T |
| Cancel Spline | Escape |
Sewing
Hidden from this page entirely unless the simulation nodes are visible to you.
| Command | Default chord |
|---|---|
| Toggle Free Mode | F |
| Reverse Selected Seam | Ctrl+B |
Camera (hold RMB)
| Command | Default chord |
|---|---|
| Move Forward | W |
| Move Backward | S |
| Strafe Left | A |
| Strafe Right | D |
| Move Up | E |
| Move Down | Q |
These six only fire while the right mouse button is held - see WASDQE fly.
Held Modifiers
Six rows, each a combo choosing Shift, Ctrl or Alt:
| Role | Default |
|---|---|
| Smooth / Secondary (brush) | Shift |
| Invert (brush) | Ctrl |
| Orbit Camera | Alt |
| Add to Selection | Ctrl |
| Subtract from Selection | Shift |
| Mirror Landmark | Shift |
Brush Palette
Ten combos, one per numbered slot (keys 1 through 9, then 0 for slot 10, plus the radial menu on Space), each labelled Slot {n} with its key shown alongside. Each combo picks which brush that slot fires: None, Sculpt, Smooth, Grab, Move, Inflate, Pinch, Flatten, Clay, Scrape, Fill, Plane, Restore, Project, Displace, Blend, Scale or Twist.
| Slot | Key | Default brush |
|---|---|---|
| 1 | 1 | Sculpt |
| 2 | 2 | Smooth |
| 3 | 3 | Grab |
| 4 | 4 | Inflate |
| 5 | 5 | Pinch |
| 6 | 6 | Flatten |
| 7 | 7 | Clay |
| 8 | 8 | Scrape |
| 9 | 9 | Fill |
| 10 | 0 | Move |
Dragging a tool from the tool tower onto a wedge of the radial brush menu reassigns that slot the same way.